Book I Chapter 3 Troubleshooting and Configuring Linux (Web hosting isp)
Book I Chapter 3 Troubleshooting and Configuring Linux Troubleshooting X 73 Another sign of undetected hardware is when the installation program skips a step. For example, if the Linux kernel does not detect the network card, the installation program skips the network configuration step. To manually install devices, follow these steps: 1. Type linux noprobe at the boot: prompt in the initial text screen. The installer then displays a dialog box that shows you the devices that are detected and gives you the opportunity to add other devices. 2. Press Tab to highlight the Add Device button, and then press Enter. The installer displays a dialog box that prompts you for the type of device SCSI or Network. 3. If you have any SCSI device, such as a SCSI hard drive, select SCSI and press Enter. The installer displays a list of SCSI controllers. When you select the one on your system and press Enter, the installer then loads the appropriate driver module. The SCSI driver automatically probes and determines the SCSI controller s settings. After you add any SCSI controllers, you re back at the initial dialog box and from there you can add network cards. 4. If you select Network from the list and press Enter, the installation program displays a list of network cards from which you can select your network card. When you press Enter, the installation program loads the driver module for the selected network card. That driver then probes and determines the network card settings. 5. [Optional] If you need a Linux device driver that does not come with Fedora Core, try checking the vendor s Web site or using a search engine (such as Google www.google.com) to find a Linux driver. Many hardware vendors provide Linux device drivers for download, just as they do Windows drivers. After you finish adding the SCSI controllers and network cards, the installer switches to graphics mode and guides you through the rest of the installation. Troubleshooting X I had this problem on an older PC every time I installed Linux: During installation, the GUI installation worked fine but when I rebooted the PC for the first time after installation, the graphical login screen would not appear. Instead, I would end up with a text login screen or the boot process might
Searching for affordable and proven webhost to host and run your servlet applications? Go to Linux Web Hosting services and you will find it.